Mitsubishi 4G63T Evo 4-9 Low Mount Kit GT30R/GTX30R/GT35R/GTX35R

Description:

• FREE SHIPPING
• GCG Turbocharger Kit to suit Mitsubishi Lancer 4G63T Evo 4-9.
• The manifold included in this kit has a T3 flange, which is suited to all of the Garrett GT30R range (GT3071R, GT3076R, GT3082R) and the GT35R Range (GT3582R, GT3566R). It will also suit the complete T3 flanged GTX range (GTX3071R/GTX3076R/GTX3576R/GTX3582R).
  
•  To use any of these turbochargers to their full potential, GCG highly recommend the use of all available bolt on modifications (fuel system/ecu/FMIC etc).
  
• The GT(X)3071R or GT(X)3076R are the most popular turbochargers used in this kit, as they can provide extremely good mid range power, without having to run a built engine. Of course, this would depend on what sort of power you are chasing and what sort of boost you'd like to run. For a stock motor, an 0.63a/r turbine housing is suggested.
  
• The GT(X)3582R and above would only be beneficial on an engine with upgraded bottom end, drop-in cams, along with all bolt on upgrades. The 0.63a/r turbine housing is recommended for any engine without cams or extensive head work, step up to an 0.82a/r if the head has been modified with cams/porting.
  
• The manifold supplied is a T3 flanged manifold, which takes a 45mm Wastegate. Custom turbochargers are available with this kit, so please use the "product question" link below if a custom turbocharger is required.

Kit Components:

• Garrett GT(X)3071R / GT(X)3076R / GT3082R / GTX3576R / GT(X)3582R.
• Turbosmart 45mm Hyper Gate
• Stainless Steel (SUS321) Manifold, 3mm Wall Thickness.
• Complete Oil & Water Line Kit.
• All Turbo Gaskets, Studs & Nuts.
• Exhaust Manifold Gasket.
• Dump Pipe Flange & Gasket.